Spark Plug Gap Tool with 32 Blade Steel Feeler Gauge&Lower Control Arm Prying Tool

Spark Plug Gap Tool with 32 Blade Steel Feeler Gauge&Lower Control Arm Prying Tool

• Universal Fit: Spark plug gapping tool is fit for most of 14mm 12mm 10mm 16mm standard spark plugs and non-preset gap spark plugs; NOT compatible with 18mm thread and long reach or short reach plugs spark plugs.
• Easy to Use: Spark plug gap tool helps you to adjust the gap with less time and effort; Firstly use your desired size feeler gauge for gap thickness; secondly put the spark plug into the tool, then slowly turn the knob to reach the desired gap thickness; thirdly rotate the knob slightly backward to disengage the spark plug from the tool, then use the feeler gauge again; If the desired gap thickness is not reached, repeat the above steps.
• Adjustment Tips: Rotate the knob slightly backward, then use the feeler gauge; In this way, the measurement of the gap thickness will not be affected by the rebound of the side electrode; Do not rotate the screw directly, causing the plug gauge and the spark plug to come into close contact, which may result in the wear of the spark plug coating and affect power and fuel consumption.
• Features: This new lower control arm prying tool and Pry Bar Wrench Adaptor is designed for prying down the lower control arm to separate the lower ball joint; Aids in getting ball-joints free from knuckles, adjustable position pulling arm allows you to position the tool where needed
• Universal Fit: The lower ball joint pry and crowbar adapter head tool is applicable for most front-wheel drive vehicles, import cars, domestic vehicles, and minivan; ideal for use in hard to access areas